Single Axis

Single-axis slewing drives rotate around one axis. These products are the standard in slewing drives, the easiest to install, and the most commonly used. The VE offers vertical mounting and a fully-enclosed drive in one high-powered unit.

Single Axis

Single-axis slewing drives rotate around one axis. These products are the standard in slewing drives, the easiest to install, and the most commonly used. The VE offers vertical mounting and a fully-enclosed drive in one high-powered unit.

Single Axis

Single-axis slewing drives rotate around one axis. These products are the standard in slewing drives, the easiest to install, and the most commonly used. The SE drives offer load-holding and rotational torque from one enclosed gearbox.

Single Axis

Single-axis slewing drives rotate around one axis. These products are the standard in slewing drives, the easiest to install, and the most commonly used. The VE offers vertical mounting and a fully-enclosed drive in one high-powered unit.

Single Axis

Single-axis slewing drives rotate around one axis. These products are the standard in slewing drives, the easiest to install, and the most commonly used. The KE drive offers an IP55 rating with no maintenance required after installation.

Single Axis

Single-axis slewing drives rotate around one axis. These products are the standard in slewing drives, the easiest to install, and the most commonly used. The S is an open drive offering easy adjustments for equipment requiring daily maintenance.

Dual Axis

Dual-axis slewing drives rotate around two separate axes independently at the same time. These products can hold large loads with a wide range of movement. The SDE is a dual positioner that can be mounted on a combination of axes to offer a full range of movement.

Rings & Gears

Slewing rings and gears are used when an entire gearbox is not needed. These products are specialized, individual components and can be functional in new marketplaces and unique applications. Slewing rings offer rotary devices a cost-effective, load-holding solution in a compact design.

Rings & Gears

Slewing rings and gears are used when an entire gearbox is not needed. These products are specialized, individual components and can be functional in new marketplaces and unique applications. The W rotator offers high power and rotational control in a compact package.

-
PRODUCTS MARKETS

Blog

Kinematics Has Gone Lean for a Better Manufacturing Process

Kinematics has completed implementation of a lean manufacturing system to reduce costs, increase quality, and improve interactions between suppliers and customers. In lean manufacturing, the system constantly adjusts to inconsistencies in an attempt to achieve perfection.

The principal idea of lean manufacturing is development of a core flexible system that reduces organizational stress and eliminates all possible wastes. The types of wastes the process removes include:

  • Over-production
  • Time-on-hand
  • Movement
  • Processing
  • Defects
  • Transportation
  • Stock

Continuous improvement requires challenging everyone in the organization, particularly throughout the supply chain, to be creative and strive to improve the system every day. Decisions must be based on a long-term philosophy of improvement, sometimes at the expense of short-term financial gains. Management leadership plays a critical part in carrying out such lofty goals.

By working to establish the best process to achieve our desired results, Kinematics manufacturers can:

  • Create continuous process flow to bring problems to the surface
  • Use inventory pull to avoid over-production (work-in-progress waste)
  • Level the workload throughout the process to avoid bottlenecks
  • Shape a culture that stops and fixes problems, not cover them up
  • Build a foundation based on standardized tasks
  • Use visual controls wherever possible to make everyone aware of issues immediately
  • Manufacture using only reliable, tested, and proven technology

A key feature for eliminating waste is a pull inventory system. This starts with a shipment to the customer. Then work parts are pulled back through the manufacturing process all the way to the raw material. By using this system, nothing starts until a customer order is released.

The implementation of lean manufacturing at Kinematics has made the organization more aggressive with continuous improvement, resulting in the best products and customer service on the market.

 

KMI Slewing Drives
Installed to Date

1,001,450

Sign up to learn about our new technologies